Cement pipe making equipment refers to mechanical products used for making cement pipes, mainly consisting of two parts: the pipe making machine and the pipe making mold. When selecting equipment, the appropriate type should be chosen based on the actual production and manufacturing needs. Pipe making machines can be divided into extrusion type, suspension roller type, etc. When using them, pay attention to the correct installation methods and standardized operating procedures. The relevant details to note when installing pipe making equipment are as follows:

1. When laying cement pipe making equipment, users should ensure the inner wall is flush, and the inside of the pipe is clean, free of dirt and excess mortar.

2. When preparing to install the equipment, use a plumb line to control the installation axis.

3. Users should also ensure that all pipe sections are laid according to the accurate axis and the slope shown in the drawings.

4. When installing pipe sections, manual labor should be used in conjunction with the excavator, starting from the downstream side and ensuring the joint faces upstream.

5. Ensure that each pipe section is tightly fitted to the base to ensure even stress distribution.

6. After installation, conduct inspection and testing.

The cement pipe making equipment can only be put into use after installation and if no abnormalities occur during operation.