Cement pipe making machines are one of our company's main products, primarily used for the production of cement pipes. When using this equipment, it's crucial to pay attention to correct operating procedures and related maintenance. Operators should understand the equipment's components, operate it according to the operating procedures, and perform necessary maintenance. Steam curing is essential during the cement pipe manufacturing process. Below is an introduction to the steam curing steps for cement pipes.

The main steam curing process for cement pipes is as follows:

1. After the cement pipe is fabricated on the cement pipe making machine, the cement pipe and the mold are hoisted together into the steam curing tank for steam curing, which takes approximately 3-4 hours. The steam curing process involves three stages.

2. In the first stage, the temperature in the steam curing tank rises from a low temperature (30-40 degrees Celsius) to a high temperature (100 degrees Celsius) over approximately one hour.

3. The second stage requires maintaining the high temperature (around 100 degrees Celsius) for approximately one hour.

4. The third stage involves lowering the temperature from the high temperature to the low temperature, also taking approximately one hour.

5. After 3 hours, the cement pipe is fully steam cured, and the concrete has solidified.

The above is an introduction to the steam curing steps of cement pipes made with a cement pipe making machine. We hope this information is helpful. For more detailed information about the equipment, please feel free to contact us by phone.