Cement pipe making molds are a commonly used piece of machinery in the production of cement pipes. Before purchasing a mold, users should consider their actual needs, taking into account factors such as mold quality and dimensions. Pipe making should be performed by professionally trained personnel. Proper operation and maintenance of the machinery can extend its service life.

The hoisting of cement pipe molds is a crucial step in the operation. The following are key points to note regarding hoisting:

**First, the hoisting point must be carefully determined.** The hoisting point must be accurate and aligned with the balance point. Using a hoisting wheel is the most suitable method.

**Generally, for steel mold poles no longer than 15 meters, an 8-meter hoisting distance is optimal. This optimal point lies precisely on the wheel, necessitating the use of specialized hoisting equipment.** Hoisting wheels minimize the overall impact on the cylinder and are the preferred choice.

**Second,** a hoisting boom and hook are used. The biggest difference is that the boom lifts the ring reinforcement hoisting point, while the specialized hoisting equipment lifts the wheel. The locking mechanisms also differ: the hook uses an open hook, while the specialized equipment uses a rigid self-locking device, offering the highest safety level.

**When the mold is opened, the cylinder is the most vulnerable part and requires the most protection. Therefore, the hoisting process is extremely important.** Another critical point is that the power tools used for the mold connection bolts must not be over-limited, as this can cause bolt deformation and damage. The grooves at the connection points must be cleaned after each use.

** The above are the key points regarding the hoisting of cement pipe-making molds. We hope this information is helpful. For more information about pipe-making molds, pipe-making machinery, and equipment, please feel free to contact us by phone.